녹화 업그레이드 단계
1 단계 : FAT32 형식의 4G SD 카드를 준비하여 비디오 스위처의 SD 카드 슬롯에 삽입하십시오. 만약
SD 카드의 남은 용량을 올바르게 확보 할 수 있으며 카드를 사용하여 업그레이드 할 수 있습니다. 당신이 할 수없는 경우
확인한 후 다시 포맷하거나 다른 SD 카드를 교체하십시오.
업그레이드하기 전에 시스템 설정을 입력하고 펌웨어 버전 번호를 확인한 후 기록하십시오. 네 번째
하단은 녹화 프로그램의 버전을 나타냅니다 (xx-xx-xx-xx-xx-06-xx-xx-xx. 06은 v06을 나타냄)
녹음);
2 단계 : "V14_uboot"디렉토리 아래의 "u-boot"파일을 SD 카드의 루트 디렉토리로 복사하고 업그레이드
갈라져.
업그레이드 방법 :
비디오 스위처의 전원을 끕니다.
SD 카드를 비디오 스위처에 넣고 SD 카드 슬롯의 녹색 LED 표시등 인 비디오 스위처를 다시 시작하십시오.
깜박임은 진행중인 업그레이드를 의미합니다. LED가 깜박임을 멈출 때까지 약 15 초 동안 기다립니다.
멀티 뷰에서 SD 카드의 용량을 감지하면 업그레이드가 성공합니다.
3 단계 :
SD 카드를 제거하고 SD 카드의 파일을 삭제 한 다음 "rootfs"및 "u-boot"파일을
"V14_upgrade"디렉토리를 SD 카드의 루트 디렉토리로 바꾸고 함께 업그레이드하십시오.
업그레이드 방법 :
비디오 스위처의 전원을 끕니다.
SD 카드를 비디오 스위처에 넣고 SD 카드 슬롯의 녹색 LED 표시등 인 비디오 스위처를 다시 시작하십시오.
깜박임은 진행중인 업그레이드를 의미합니다. LED가 깜박임을 멈추고 남은 용량이 될 때까지 약 3 분 동안 기다립니다.
SD 카드의 멀티 뷰가 멀티 뷰에서 감지되면 업그레이드에 성공한 것입니다.
버전 번호는 "14"입니다 (예 : xx-xx-xx-xx-xx-12-xx-xx-xx).
Recording Upgrade Steps
Step 1: Prepare an 4G SD card in FAT32 format and insert it into the SD card slot of the Video Switcher. If the
remaining capacity of the SD card can be acquired correctly, the card can be used to upgrade. If you cannot
identify it, please re-format it or replace another SD card.
Enter the System Settings before upgrading, check the firmware version number and record it. The fourth from
the bottom represents the version of the recording program(xx-xx-xx-xx-xx-06-xx-xx-xx. 06 represents v06
recording);
Step 2: Copy the "u-boot" file under the "V14_uboot" directory to the root directory of the SD card and upgrade
separately.
Upgrade method:
Power off the video switcher.
Insert the SD card into the Video Switcher and restart the Video Switcher, the Green LED light of SD card slot
flashing means upgrade in process. Wait about 15 seconds until the LED stops flashing, and the remaining
capacity of the SD card can be detected in the multi-view, then the upgrade is successful;
Step 3:
Remove the SD card, delete the files in the SD card and copy the "rootfs" and "u-boot" files under the
"V14_upgrade" directory to the root directory of the SD card and upgrade together.
Upgrade method:
Power off the video switcher.
Insert the SD card into the Video Switcher and Restart the Video Switcher, the Green LED light of SD card slot
flashing means upgrade in process. Wait about 3 minutes until the LED stops flashing, and the remaining capacity
of the SD card can be detected in the multi-view, then the upgrade is successful.
The version number is "14", for example: xx-xx-xx-xx-xx-12-xx-xx-xx.
회원에게만 댓글 작성 권한이 있습니다.